mini PCI-E Adapters

The unit provides 2-port Mini PCI-e SSD connector, built-in 2.5-inch shell SATA II high-performance array card. It provides hardware to setup the RAID level, no driver, BIOS or software required for RAID installation, can be switched to RAID 0, RAID 1, JBOD three mode operation settings. 

Learn More

The adapter allows the installation of mSATA SSD as system disk, and boots the operating system directly, without having to install any drivers. Learn More

IDE to mini PCI-e (PATA) SSD adapter with PATA 2.5” SSD Housing. This unit uses a 2.5" ultra-lightweight aluminum material shell, coupled with the mini PCI-e(PATA) SSD combination to IDE adapter. When assembled, it is a standard 2.5” SATA SSD.

Learn More

M.2 (NGFF) 2G/3G module to mini PCI-E Adapter for CDMA GPS LTE

Learn More

This adapter is used to convert the BCM94360CD/BCM94331CD module from a MacBook AIR or Pro as mini PCI-E 52 Pin interface wireless card. Learn More

Mini PCI-E Module to USB 5 Pin Port

Learn More

Mini PCIE to Dual SATA III Adapter with Power Learn More

Adapter for converting a Mini PCIe slot to two USB 2.0 interfaces. Is compatible with any mini PCIe interface and no drivers are required. Note: does not support USB 3.0 devices.

Learn More

The mini PCIe extender is a debug and test tool.  The design of the FFC (Flat Flexible Cable) cable is for flexible use.  Not only for used for a full-size Mini Card adapter but also for Half-size Mini Cards by removing the extra full-size extensions. The mini PCI-Extender card is designed to minimize the signal degradation effects of the extender by proven design techniques.  It is also a powerful tool for engineers and factory tests.

Learn More

PCI-E Express X1/USB to Mini PCI-E Adapter Card 

Learn More

mSATA Board with MO-300A Clip with USB 2.0 Cable. The card is compliant with 1.8 Inch Micro SATA specification. It supports 3.3 Volt Mini PCI-e SSD mSATA Modules. Micro SATA Cables PN #MST-16P-USBCBL Learn More

The SATA II, III to mini PCI-e SSD adapter is designed to provide an interface between the SATA II, III and the mini PCI-e 52-pin Bus SATA interface standard.   Works with DOS, Windows 95, 98, XP, 2000, Win 7, Linux, Unix, allowing the operating system to boot and run from a mSATA module.

Learn More

mSATA MO-300B SSD to 2.5 inch SATA Adapter which allows users to operate a mSATA MO-300B SSD in any standard SATA host controller and transfer data to a PC or laptop with a 22 Pin 2.5 inch SATA connection. Item # MSATA-MO-300B-ADPT. Learn More

This adapter is an mSATA SSD HDD to 20+6pin as a SanDisk/Toshiba/Intel SSD for Lenovo X1 Carbon Ultrabook. It is used to convert mSATA SSD as 26 Pin SSD for Lenovo X1 Carbon Ultrabook.

Learn More

This unit is a SATA III to mSATA adapter, providing one 7+15pin SATA connector on the host connection and one Mini PCI-e 52-pin connector on the SSD storage devices connections. When assembled, it can operate in a variety of operating systems. Such as DOS, Windows 95, 98, XP, 2000, Vista, Win 7, Linux, Unix. Learn More

The SATA II, III to mini PCI-e SSD adapter is designed to provide an interface between the SATA II and the mini PCI-e 52-pin Bus SATA interface standard.  Works with DOS, Windows 95, 98, XP, 2000, Win 7, Linux, Unix, allowing the operating system to boot and run from a mSATA module.

Learn More

This USB 3.0 mSATA 3 SSD Adapter Card as a USB Disk Driver is fully compliant with USB 3.0, and 2.0. Learn More

This bracket is compatible with Half WLAN / WIFI / Wireless PCI-e Card to PCI-e Card and MSATA MO-300B Cards. Note : Memory card in picture is not included.

Learn More